PC vs TPE
How PC and TPE compare, from typical settings across every filament we list.
- PC is tougher, stiffer, more heat resistant and better outdoors; TPE is easier to print and more flexible.
- PC typically prints about 55 °C hotter at the nozzle.
- PC typically prints about 65 °C hotter on the bed.
- There are 47 PC filaments in 131 colours, and 13 TPE filaments in 41 colours.
At a glance
Our rating, out of 5| PC | TPE | |
|---|---|---|
| Ease of printing | Easier to print | |
| Toughness | Tougher | |
| Stiffness | Stiffer | |
| Heat resistance | More heat resistant | |
| Outdoor and UV | Better outdoors | |
| Flexibility | More flexible | |
| Setup | Needs an enclosure, Dry before printing, Needs ventilation | Dry before printing |
| PC | TPE | |
|---|---|---|
| Full name | Polycarbonate | Thermoplastic elastomer |
| Filaments listed | 47 | 13 |
| Brands | 27 | 9 |
| Colours | 131 | 41 |
| Nozzle temperature | 260–300 °C | 210–240 °C |
| Bed temperature | 100–120 °C | 30–60 °C |
| Density | 1.20 g/cm³ | 1.20 g/cm³ |
| Length of 1 kg (1.75 mm) | about 346 m | about 346 m |
| Max drying temperature | 75 °C | 60 °C |
Temperatures are medians across each material's filaments, rounded to 5 °C. Always check the maker's settings for a specific filament.
Brands that make both
2 brands make both PC and TPE.