PA6 vs HIPS
How PA6 and HIPS compare, from typical settings across every filament we list.
- PA6 is tougher, more heat resistant, better outdoors and more flexible; HIPS is easier to print.
- PA6 typically prints about 35 °C hotter at the nozzle.
- HIPS typically prints about 10 °C hotter on the bed.
- HIPS is less dense, so a 1 kg spool holds about 35 m more 1.75 mm filament.
- There are 69 PA6 filaments in 119 colours, and 15 HIPS filaments in 46 colours.
At a glance
Our rating, out of 5| PA6 | HIPS | |
|---|---|---|
| Ease of printing | Easier to print | |
| Toughness | Tougher | |
| Stiffness | ||
| Heat resistance | More heat resistant | |
| Outdoor and UV | Better outdoors | |
| Flexibility | More flexible | |
| Setup | Needs an enclosure, Dry before printing | Needs an enclosure, Needs ventilation |
| PA6 | HIPS | |
|---|---|---|
| Full name | Nylon 6 (polyamide 6) | High-impact polystyrene |
| Filaments listed | 69 | 15 |
| Brands | 28 | 12 |
| Colours | 119 | 46 |
| Nozzle temperature | 250–290 °C | 220–250 °C |
| Bed temperature | 80–100 °C | 90–110 °C |
| Density | 1.14 g/cm³ | 1.04 g/cm³ |
| Length of 1 kg (1.75 mm) | about 365 m | about 400 m |
| Max drying temperature | 80 °C | – |
Temperatures are medians across each material's filaments, rounded to 5 °C. Always check the maker's settings for a specific filament.
Brands that make both
6 brands make both PA6 and HIPS.