ABS vs PCTG
How ABS and PCTG compare, from typical settings across every filament we list.
- ABS is more heat resistant; PCTG is easier to print, tougher and better outdoors.
- ABS and PCTG print at about the same temperature at the nozzle.
- ABS typically prints about 20 °C hotter on the bed.
- ABS is less dense, so a 1 kg spool holds about 62 m more 1.75 mm filament.
- There are 151 ABS filaments in 1,021 colours, and 26 PCTG filaments in 151 colours.
At a glance
Our rating, out of 5| ABS | PCTG | |
|---|---|---|
| Ease of printing | Easier to print | |
| Toughness | Tougher | |
| Stiffness | ||
| Heat resistance | More heat resistant | |
| Outdoor and UV | Better outdoors | |
| Flexibility | ||
| Setup | Needs an enclosure, Needs ventilation | No enclosure or special setup needed |
| ABS | PCTG | |
|---|---|---|
| Full name | Acrylonitrile butadiene styrene | Polycyclohexylenedimethylene terephthalate glycol |
| Filaments listed | 151 | 26 |
| Brands | 72 | 13 |
| Colours | 1,021 | 151 |
| Nozzle temperature | 230–260 °C | 230–260 °C |
| Bed temperature | 90–110 °C | 70–90 °C |
| Density | 1.04 g/cm³ | 1.23 g/cm³ |
| Length of 1 kg (1.75 mm) | about 400 m | about 338 m |
| Max drying temperature | 80 °C | – |
Temperatures are medians across each material's filaments, rounded to 5 °C. Always check the maker's settings for a specific filament.
Brands that make both
12 brands make both ABS and PCTG.